The whole "documenting your project" thing is taking longer than I thought. Here are some teaser pics in the meantime!
So this is a picture of the IOBridge Serial Module to XBEE interface. Basically, I cobbled this together and really need to fabricate a dedicated design since this is a bit fragile.
Here's an image of the LED Display controller. Basically a uPic is used to talk to the led drivers (8xMax7219's) through the serial port (in this case an XBEE). I previously used a Ethernet to serial adapter prior to the discovery of IOBridge.
Here's a picture of the entire display mounted on a 1/4" piece of clear acrylic.
This is an example of the output from the display. It's a bit dark because the blue leds are just retardedly bright and jacked with the iPhones light settings.
