iPhone enabled internet dog feeder 2.0

[MirrorSpock]

sounds like the same device,
if you find a way to pull the video stream out off it, let me know.


I'm at work, so i can't test it now, but i just found a FAQ for it
http://www.icamview.com/FAQ.htm

Code: [Select]

Q7B06:  I would like to create a URL link to access images from my webpage.
 
Note: Applicable to HCV91 firmware *.CV91.7B06 and HCV73 firmware *.CV73.7A02 and above only.
 
Video streaming on webpage can be achieved using META / Java script.
[To view camera image]
example: http://192.168.0.214/pda.cgi?user=admin&password=1234&page=image&cam=1
  user: user account
  password: user password
  cam: 1,2
    1: camera A
    2: camera B

[To control camera direction]
example: http://192.168.0.214/pda.cgi?user=admin&password=1234&page=execute&cam=1&command=1
  user: user account
  password: user password
  cam: 1,2
    1: camera A
    2: camera B
  command: 1,2,3,4
    1:Up
    2:Down
    3:Left
    4:Right
streaming should be possible.... I hope i have the right firmware..

[MirrorSpock]

Hope i have the right firmware
hope i don't have a counterfeit unit... http://www.icamview.com/fake.htm

shame.. no pda.cgi, so i'm out of luck..

[hacklife]

That's unfortunate mirror. I'm sorry : [  Thank you for posting that link about checking for fakes. Mine appears to be genuine(as described by the link). I guess luck was on my side, since i didn't know about the fakes. Good luck and thank you!

[MirrorSpock]

That's unfortunate mirror. I'm sorry : [  Thank you for posting that link about checking for fakes. Mine appears to be genuine(as described by the link). I guess luck was on my side, since i didn't know about the fakes. Good luck and thank you!

the question then is, where did you get yours? i need a new one.

[hacklife]

I found mine on Ebay. I will send you those details now via pm....