•
Beer Pouring Robot – Serv O’Beer
Steve from polymythic.com built a “robot ” with Construx, a servo, and an ioBridge module that allows you to pour a beer with the turn of your iPhone.
Here is a video introduction of the Serv O’Beer robot:
Steve also posted the step-by-step instructions on Instructables.com. Steve used the iTurn functionality, the servo board, and the IO-204 module to allow the Internet-connected iPhone pour his beer.
Serv O’Beer with iPhone for the Perfect Pour -- More DIY How To Projects
Serv O’Beer is a clever project and it uses Construx which is every one’s favorite. Steve is a true polymath.
•
3 Responses to “Beer Pouring Robot – Serv O’Beer”
•
5. January 2009 at 8:13 pm :
[...] including steps to make it. Also, you will see the project was picked up at Gizmodo, Engadget, ioBridge Projects, and the fine folks over at MAKE. :ibeer, instructables, iobridge, iphone, iturn No comments [...]
28. January 2009 at 10:33 am :
[...] match. You can also find a few posts on his blog about weaving and bow making and the original Serv O’Beer project. Tags:arduino, construx, iphone, ipod touch, Projects, servo, widgets, youtube [...]
25. December 2009 at 12:45 pm :
[...] Serv O’Beer — Have your iPhone pour a beverage for your New Year’s party [...]