====== Smart Boards ======

===== Introduction =====

An ioBridge Smart Board extends the functionality of the host module and provides more complex functionality than function boards.

The following smart boards are currently available:

  * [[smart-boards:Servo Controller Smart Board]]

  * [[smart-boards:X10 Smart Board]]

  * [[smart-boards:Serial Smart Board]]

===== Installation =====

Installation with the ioBridge IO-204 Module involves two steps:

  - Connect the smart board to an open channel
  - Select the corresponding channel mode on the “Modules” tab of the Interface

Once the proper mode is selected, the module should restart and sync with the smart board. There is a green LED on the smart board. When the LED is illuminated, the smart board is connected to the module properly.

===== Configuration =====

Use the “Modules” tab on the interface to configure the settings for the smart board. Settings will vary by smart board type.