Smart Boards

An ioBridge Smart Board extends the functionality of the host module and provides more complex functionality than function boards.

The following smart boards are currently available:

• Servo Controller Smart Board (SB-1)

• X10 Smart Board (SB-4)

• Serial Smart Board (SB-5)

Installation with the ioBridge IO-204 Module involves two steps:

1. Connect the smart board to an open channel
2. Select the corresponding channel mode on the “Modules” tab of the Interface

Once the proper mode is selected, the module should restart and sync with the smart board. There is a green LED on the smart board. When the LED is illuminated, the smart board is connected to the module properly.

Use the “Modules” tab on the interface to configure the settings for the smart board. Settings will vary by smart board type.