Servo Controller Smart Board (SB-1)

Control up to 4 R/C servos simultaneously. Each servo can be set own position and speed. The output of the servo headers is 4 separate PWM signal, power, and ground lines.

Part Number: SB-1

Caution: Don't plug or unplug servos while the system is powered. Doing so may create a power spike that damages the Servo Controller Board, causing it to overheat. Only apply power to the IO-204 module after the servo(s) have been attached to the controller board and the controller board has been inserted into an I/O channel.

All servos have three wires:

• Black or Brown is for ground

• Red is for power (~4.8-6V)

• Yellow, Orange, or White is the signal wire (3-5V)

Society of Robots

ioBridge Store